Lamusa Europa-2110, Руководство по эксплуатации

Страница: 14 / 42

14
1 2
4-STARTING
Finally loosen gearbox’s knob, move the gear lever on the sector graduated from 0 to 100 and tight the
knob in the number position selected previously, as indicated in the dosing tables.
4.4- CALIBRATION TEST
Once the narrow or wide position is selected, and both the base flap and the gear lever are in correct
position, it is essential to perform a calibration test.
FIRST : withdraw the spring-loaded lever (2,) that keep the hopper bar in working position and push the
bar (1) forward until the end. This will allow to place the calibration cup under seed wheels.