LaMotte STORMWATCH MS4 Скачать руководство пользователя страница 30

Страница: 30 / 32

9. Turn the bottle right side up and remove the

Titrator.

10. Insert the adapter tip into the opening of the tiration

tube cap. Slowly depress the

plunger to dispanse the titrating solution. Gently

swirl the tube to mix the solution.

11. Continue adding the titration solution until the

speci

ed color change occurs. If the color change

does not occur when the large ring of the plunger

reached the bottom of the scale, re

ll the Titrator to

the zero line. Continue titration until the color change

occurs.

12. Read the result directly from the scale where the

large ring on the Titrator meets the Titrator barrel.

If the Titrator was re

lled to reach the

nal color

change, add the total amounts of titrant used to

determine the

nal result.

13. If no additional, tests are to be made, discard the remaining titration

solution in the Titrator. Do not return the titrating solution to the reagent

bottle. Thoroughly rinse the titration tube and the Titrator.

Do not remove

the plunger or the adapter tip from the Titrator

Содержание STORMWATCH MS4

































Результаты поиска

Содержание STORMWATCH MS4

Отзывы:

Похожие инструкции для STORMWATCH MS4

Бренды по названию

Популярные бренды

LaMotte STORMWATCH MS4, Руководство пользователя

Результаты поиска

Содержание STORMWATCH MS4

Отзывы:

Похожие инструкции для STORMWATCH MS4

Бренды по названию

Популярные бренды