22
SETTING THE DATA LOGGER
NOTE: Data from the data logger must be retrieved in the same language in
which it was collected.
The default setting for the data logger is enabled. The meter will log the last
500 data points. The counter in the center bottom of the display will show how
many data points have been logged. The display will show 500+ when the data
logger has exceeded 500 points and the data points are being overwritten.
1. From
the
Editing Menu
press
or
to scroll to
Logging
.
2. Press
ENTER
to select
Logging
.
3. Press
or
to scroll to the desired function.
4. Press
ENTER
. The screen will display
Storing...
for about 1 second and
return to the
Editing Menu
.
FACTORY SETUP
The Factory Setup menu is used in manufacturing of the Smart3 Colorimeter.
This menu is not for use by the operator in the
fi
eld.
SETTING THE POWER SAVE
The power saving Auto Shutoff feature will turn the meter off when a button has
not been pushed for a set amount of time. The default setting is disabled. To
change the setting:
1. From
the
Editing Menu
, press
or
to scroll to
Set Power
Save
.
2. Press
ENTER
to select
Set PWR Save
.
3. Press
or
to scroll to the desired function.
4. Press
ENTER
. The screen will display
Storing...
for about 1 second and the
meter will return to the
Editing Menu
.
