19
SMART3 GENERAL INFORMATION
For more information see SMART3 instruction manual.
EPA COMPLIANCE
The instrument is an EPA-Accepted instrument. EPA-Accepted means that
the instrument meets the requirements for instrumentation as found in
test procedures that are approved for the National Primary Drinking Water
Regulations (NPDWR) or National Pollutant Discharge Elimination System
(NPDES) compliance monitoring programs. EPA-Accepted instruments may
be used with approved test procedures without additional approval.
CE COMPLIANCE
The instrument has earned the European CE Mark of Compliance for
electromagnetic compatibility and safety. The Declaration of Conformity for the
instrument is available at www.lamotte.com.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interferences in which case the user
will be required to correct the interference at his own expense.
IP67 CERTIFICATION
The instrumentmeets IP67 standards for protection against dust and immersion
only when the USB port plug is in place. Documentation is available at www.
lamotte.com.
