25
Instructions and Installation
•
IMPORTANT:
Ensure that the
electricity supply is switched
off before connecting. Your
hob is intended for permanent
installation.
• Your appliance must be
connected to fixed wiring
via the use of a double pole
switched fused spur outlet
with at least 3mm contact
separation. The isolation switch
must be accessible after
installation (see technical data
for fuse rating). We recommend
the use of an RCD device as
additional protection.
• The product should only be
installed by a suitably qualified
person. The product must be
installed in accordance with all
local regulations
• The terminology DOUBLE POLE
-/+ means that both the live
and neutral supplies are
switched and disconnected at
the same time.
• The terminations labelled
SUPPLY are connections for the
internal house wiring and the
terminations labelled LOAD
are for connection to the
appliance.
•
IMPORTANT:
The wires in
the mains lead are coloured
in accordance with the
following code:
BLUE
= Neutral
BROWN
= Live
GREEN
/
YELLOW
= Earth
• As the colours of the wires in
the mains lead of this appliance
may not correspond with the
coloured markings identifying
the terminals in your spur box,
proceed as follows;
• The wire which is coloured
blue must be connected to
the terminal which is marked
with the letter ‘N’ or coloured
‘BLACK’. The wire which
coloured brown must be
connected to the terminal
which is marked with the letter
‘L’ or coloured RED. The green
and yellow earth ‘E’ should
be connected to the terminal
marked with following symbol .
7. Electrical connections
