22
www.howdens.com
Gas On Glass Hob 5-Zone
LAM1551
Elbow installation
The pipework shall be fitted in
such a way that it cannot come
into contact with a moveable part
of the housing unit (e.g. a drawer)
and does not pass through any
space where it may become
crushed or kinked or damaged
in any way.
To prevent any potential damage
to the hob please carry out
installation as following:
1. Assemble the parts in this order;
• ½ Male adapter
• ½ Seal
• ½ Female gas adaptor
conical - cylindrical or
cylindrical - cylindrical.
2. Tighten the joints with the
spanner, remembering to twist
the pipes into position.
3. Attach fitting C to the mains
gas supply using a rigid copper
pipe or flexible steel pipe.
IMPORTANT:
Carry out a final
check for leaks on the pipe
connections using a soapy solution.
NEVER USE A FLAME
. Also make
sure that the pipework cannot
come into contact with a moving
part of the cabinet (e.g. a drawer)
and that is not situated where it
could be damaged.
WARNING!
If gas can be
smelt in the vicinity of this
appliance turn off the gas
supply to the appliance and
call the engineer directly.
Do not search for a leak
with a naked flame.
Gas connection
These instructions are for
qualified personnel, installation
of equipment must be in line with
relevant national standard.
(For UK only: by law the gas
installation must be carried out
by a “Gas Safe” installer)
.
All work must be carried out
with the electricity supply
disconnected.
The rating plate on the hob
shows the type of gas with
which it is designed to be used.
Connection to the mains gas
supply or gas cylinder should
be carried out after having
checked that is regulated for
the type of gas with which it
is supplied. If it is not correctly
regulated see the instructions
in the following paragraphs to
change gas setting.
