Lami Corporation Lotus-14LK-H, Инструкция по эксплуатации

Страница: 16 / 24

15
When inserting laminate film with paper into the laminator, incorrect handling can cause poor
laminate or failure of the laminator.
Refer to details below for correct insertion.
Correctly insert laminate film
The contact side of the film must be inserted first.
Direction of film insertion
Temperature and speed
setting
When inserting laminate film into the laminator,
Insert contact side first
During laminate process, 「processing temperature」 and 「processing speed」 settings have large
influence on the degree of completion.
Since temperature and speed can change depending on thickness of the paper to be processed, refer
to details on the next page to confirm appropriate setting for the paper being processed.
This machine can use over 200mic film. Please do not use under 200mic film. If less than
200mic film is used, it can get caught into the rollers.
If thin paper is processed immediately after processing a thick paper, it can get caught.
Even when READY lamp is turned on, press 【CURRENT TEMPERATURE】 to make sure that
surface temperature is at the setting value before processing.
If surface temperature is high, cool it down with 【COLD】 button.
Caution