Lambretta V125 Special 2018, Руководство пользователя

Страница: 41 / 53

37
Clean and storage
Clean the vehicle
Cleaning the vehicle in a proper and sui -
table way will make it attractive, extend
its life and optimize the performance.
Before cleaning
1. Let the engine/ muffler cool down.
Cover the muffler outlet with a plas -
tic bag to prevent water getting in -
side.
2. Close all caps, covers and electrical
connectors so no water can get in -
side.
CAUTION
• Do not use acid-based cleaners. If
products need to be used for stub -
born stains, use them selectively,
dry it immediately afterwards and
then apply a corrosion protection
spray.
• Always follow the manufacturer‘s
instructions on care and cleaning
agents.
• Use only water and mild detergents
or special cleaners from the dealer
to the sensitive components of the
vehicle to prevent damage. Dry the
plastic parts with a soft, dry cloth or
sponge.
• Protect particularly plastic parts,
paint, headlight glass from harsh
chemicals such as fuel, rust remo -
ver, brake cleaner or similar. The
use of such agents may result in
malfunction, damage and affect
the security itself.
• Do not use a high pressure washer
or steam cleaner. This can cause
water to penetrate bearings, elec -
trical components such as connec -
tors or switches, lighting, ventila -
tion hoses, brake shoes and brake
linings or damage, seals, paint and
other surfaces.
Cleaning after normal use
Remove dirt with warm water, a mild
detergent, and a soft, clean sponge, and
then rinse thoroughly with clean water.
Use a toothbrush or bottlebrush for
hard-to-reach areas.
Cleaning after riding in the rain, near
the sea or on salt-sprayed roads
CAUTION
Since sea salt or salt sprayed on the
roads during winter are extremely cor -
rosive in combination with water, carry
out the following steps after each ride.
• Wait until the engine / exhaust have
cooled.
• Clean the vehicle with warm water
and a mild detergent.
• Do not use hot water, which increa -
ses the corrosive effect of the salt.
• Apply a corrosion protection spray
on all metal, including chrome- and
nickel-plated, surfaces to prevent
corrosion.
After cleaning
• Dry the vehicle.
• To prevent rust, we recommend ap -
propriate care to use according to
manufacturer‘s instructions.
• Wax all painted surfaces.