Lambretta V125 Special 2018, Руководство пользователя

Страница: 28 / 53

24
! WARNING
Please note that no other spark plug
model is allowed. Using a different
spark plug model can immediately
lead to engine damage.
6. Measure the spark plug gap with a
wire thickness gauge and, if neces -
sary, adjust the gap to specifica -
tion.Clean the surface of the spark
plug gasket and its mating surface,
and then wipe off any grime from
the spark plug threads.
7. Install the spark plug with the spark
plug wrench, and then tighten it to
the specified torque.
Spark plug gap: 0,6 - 0,7 mm
!
WARNING
Please note the max. torque when in-
serting the plug.
If you do not have the ability to control
this you should leave control of the
spark plug to the dealer.
Tightening torque: 10 Nm
Engine oil
!
WARNING
It is recommended to check the engine
oil at each refuelling.
1. Start the engine and warm it up for
several minutes. After the engine is
warm, turn off the ignition and let it
cool down one minute before che -
cking.
2. Open the main stand, and take out
the oil level gauge (1) to clean it.
3. Reinsert oil level gauge (1), don’t
screw it. Take out the oil level gauge
(1) and check it, the oil level should
be between the upper (2) and lower
(3) limits.
2
3
1
CAUTION
Make sure that the oil level gauge is pro -
perly installed before riding the vehicle.
Periodic maintenance and minor repair