Lambretta V125 Special 2018, Руководство пользователя

Страница: 29 / 53

25
Engine Oil capacity:
0,7 l at oil change
Viscosity: 10W-30
Final transmission oil
The final transmission case (1) must
be checked for oil leakage before each
ride. If any leakage is found, have a dea -
ler check and repair the vehicle. In addi-
tion, the final transmission oil must be
changed at the intervals specified in the
periodic maintenance and lubrication
chart.
CAUTION
As long as the vehicle is within the war -
ranty period the dealer is responsible to
change the gear oil.
Change the final transmission oil
1. Start the engine, warm up the final
transmission oil by riding the ve -
hicle for several minutes, and then
stop the engine.
2. Place the vehicle on the main stand.
3. Place an oil pan under the final
transmission case to collect the
used oil.
4. Remove the oil filler cap (1) and
drain bolt (2) to drain the oil from
the final transmission case.
1
2
5. Install the final transmission oil
drain bolt, and then tighten it to the
specified torque.
Tightening torque: 10-15 Nm
6. Add the requested amount of the
recommended final transmission
oil, and then install and tighten the
oil filler cap.
Transmission Oil capacity:
0,17 l at oil change
Viscosity: SAE 85W-140
!
WARNING
• Make sure that no foreign material
enters the final transmission case.
• Make sure that no oil gets on the
tire or wheel.
7. Check the final transmission case
for oil leakage. If oil is leaking ple -
ase contact your dealer.
Periodic maintenance and minor repair