-
49
-
Huracán ST
– Fuses and Relays
Vehicle Introduction
® Automobili Lamborghini S.p.A.
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive sai d
information. All copyrights are the property of Automobili Lamborghini S.p.A pursuant to copyright law. All PDF chapters comprising the WEB workshop manuals described herein are based
on information that were available at the time of publication. The company reserves the right to make updates and modifications as needed. The reprinting, reproduction, distribution to
unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express written consent of Automobili
Lamborghini S.p.A. Huracán ST
ABS Software
(
cambiare intestazione)
The first time the System is started, it is important to bleed the control unit and check
whether the pipes and sensors are positioned correctly. To carry out this process, use the
ABS Race version software, with the specific cable and interface with the car.
After opening the software and connecting to the control unit, go to the testing section,
where the window below appears.
In the window below, find the area where this is possible: check the operation of the speed
sensors, a button which makes it possible to activate the pump to release the clamp for
checking the hydraulic connection, a button which makes it possible to activate the pump
manually to check its operation, and a repair bleeding wizard button which makes it
possible to activate the procedure of bleeding the control unit.