-
113
-
Huracán ST
– Clutch - Flywheel Replacement
Vehicle Introduction
® Automobili Lamborghini S.p.A.
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said
information. All copyrights are the property of Automobili Lamborghini S.p.A pursuant to copyright law. All PDF chapters comprising the WEB workshop manuals described herein are based
on information that were available at the time of publication. The company reserves the right to make updates and modifications as needed. The reprinting, reproduction, distribution to
unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express written consent of Automobili
Lamborghini S.p.A. Huracán ST
INSTALLATION
Remove the breather pipe (011703-I)
1
WARNING!
The centering tool shown MUST be
used for installing the clutch
2
Position the flywheel ring on the
engine
Install the 10 fastening screws
C
Tighten the screws
Tightening torque 70Nm
N.B.: replace screws each time
assembly is performed
3
Insert the clutch centering tool on the
clutch
C