-
147
-
Huracan ST
– Castelletto freni
Vehicle Introduction
® Automobili Lamborghini S.p.A.
The procedures and information published herein are strictly confidential and are intended exclusively for recognized professionals and persons who are authorized to receive said
information. All copyrights are the property of Automobili Lamborghini S.p.A pursuant to copyright law. All PDF chapters comprising the WEB workshop manuals described herein are based
on information that were available at the time of publication. The company reserves the right to make updates and modifications as needed. The reprinting, reproduction, distribution to
unauthorized persons and/or to third parties, and the partial or complete translation of the material contained herein are prohibited without the express written consent of Automobili
Lamborghini S.p.A. Huracán ST
8
Check that the forks of the rocker arm
mounted on the pump pins have no
obstacles by sliding the pump pins
backwards and forwards.
9
Fit the nut, the union and the gasket
supplied on the tanks.
10
Fit the 3-way union and the sensor on
the pipe, then fit the 3-way union on
the pump.
N.B. the front and rear pressure
sensors are different
11
There is a (GREEN) selector on the
center console which allows you to
distribute the braking.
Lamborghini recommends:
50 for the front
25 for the rear