Lamborghini Caloreclima BANOX 24 MCS W TOP U/IT, Руководство по установке и обслуживанию

Страница: 12 / 29

46
CONTROL PANEL
The boiler is ready to function for heating and hot water supply.
ADJUSTMENTS
Button Function
ON/OFF ON/OFF SWITCH
SUMMER/WINTER SWITCH
RIARMO/RESET BOILER RESET
PROG./MODE
PROGRAM SELECTOR
(DISPLAY)
Button Function
SEQUENZA/STEP SELECTS PARAMETERS TO BE
DISPLAYED
MEMO/STORE ENTERS DATA
+
INCREASES SETTING
- DECREASES SETTING
ADJUSTING HEATING TEMPERATURE
1) Press (MODE). An indicator light on the left-hand
display comes on.
2) Press
(STEP)
to phase 4.
3) Press the (+) (-) buttons to modify the heating tem-
perature setting.
4) Press (STORE) to memorise the data.
5) Press
(MODE)
twice to enter the new temperature
setting.
ADJUSTING HOT WATER TEMPERATURE
1) Open a hot water tap (temporarily).
2) Press
(MODE) . An indicator light on the left-hand
display comes on.
3) Press (STEP) to phase 1.
4) Press the (+) (-) buttons to modify the hot water
temperature.
5) Press (STORE) to memorise the data.
6) Press
(MODE)
twice to enter the new temperature
setting.
67
ESQUEMA DE PRINCIPIO
DESCRIPCIÓN
CiR Circulador instalación
PSG Presostato de seguridad gas
PA Presostato aire
PH
2
O Presostato agua
E.A. Electrodo de encendido
E.R. Electrodo de detección de llama
TRA Transformador
IG Interruptor general
VG1 Válvula gas 1
VG2 Válvula gas 2
VD Válvula 3 vías
E/I Interruptor verano/invierno
TA Termostato ambiente
SE Sonda externa
SR Sonda retorno
SS Sonda circ. sanitario
SM Sonda ida
VN Ventilador
X2 Conector amp. 13 polos
X3 Conector amp. 6 polos
X4 Conector amp. 2 polos
X7-X8 Conector conexión PC
3AT Fusible 3A (electroventilador)
2AF Fusible 2A (circuitos 24 V)
2AF(F1) Fusible alimentación 230 V (2A)
L Línea 230 V 50 Hz
N Neutro
C Conector Wieland paso 7,5
FA Filtro antiparasitario