Lamborghini Caloreclima BANOX 24 MCS W TOP U/IT, Руководство по установке и обслуживанию

Страница: 20 / 29

38
HYDRAULIC CONNECTION
Fit the supporting hooks and attach the assembly template, moving it up to the wall; fit all the pipes, starting
with the end pipe fittings already mounted on the template: system supply, system return, cold water, hot water,
any gas pipes and electric mains leads with room thermostat.
Once the pipes have been fitted, the end pipe fittings can be removed and ordinary caps fitted, ready for
hydraulic tests to be carried out. The template can be removed or, if left in place, will be embedded in the wall
once finishing operations have been completed (plaster and tiles); only the two supporting hooks will protrude
from the wall, as well as an opening for the connections. Attach the boiler to the hooks through the holes at the
back of the frame, push it up against the finished wall and fit the two lock nuts onto the hooks.
Make the necessary hydraulic connections using the pipes/tubes supplied, cutting them to the right length,
depending on the distance between the fittings on the boiler and those on the template embedded in the wall.
LEGEND
C
Hot water Ø 1/2”
G Gas Ø 3/4” (see cock supplied with the
boiler)
F
Boiler water supply Ø 1/2” (cold)
AE Electrical supply
M
Installation delivery Ø 3/4”
R Installation return Ø 3/4”
GS Holding hooks Ø 10mm.
NOTE: Preview hydraulic female connections.
75
VISUALIZACIÓN DE LOS DATOS (sistema MONITOR)
Al visualizar los datos, se pueden controlar los valores instantáneos de funcionamiento del aparato (que no se
pueden modificar). Presionar dos veces el botón MODE (aparece un punto luminosos intermitente a la derecha
de la primera cifra). Presionar el botón STEP para visualizar todas las FASES disponibles.
Notas N
°
fase Parámetro
Sistema acqua calda sanitaria
Temperatura de ida
Temperatura de retorno
Temperatura circuito sanitario
Temperatura externa (*)
Temperatura humos
Temperatura de ida programada o calculada
Valores a disposición del instalador 1
2
3
4
5
6
7,8
Valor
°
C
Valor
°
C
Valor
°
C
Valor
°
C
Valor
°
C
(*) Visualización del valor si está conectada una sonda (opcional)
No disponible
Con sonda externa OPCIONAL
Introducción del código e acceso
Para abandonar el programa VISUALIZACIÓN DE LOS DATOS presionar una vez