Lamborghini Caloreclima BANOX 24 MCS W TOP U/IT, Руководство по установке и обслуживанию

Страница: 7 / 29

51
Should there be a fault the system will shut down and flash the fault type on the display.
Check for proper operating conditions (gas tap open, proper feed pressure etc.) and press RESET. Should the
fault persist contact your local
LAMBORGHINI ASSISTANCE CENTRE.
By pressing MODE and STEP simultaneously the letter C will appear on the display. Keeping these buttons
pressed, enter the access code (62) by means of the + and – keys. Press STORE to memorise the code (the
display will flash twice). Press MODE to highlight the PHASE number on the display. Then press STEP to display
the list of PHASES.
RESETTING
PARAMETER DISPLAY AND MODIFICATION (ACCESS CODE)
Range Parameter
T
set
Hot water temperature From 40
°
C to 65
°
C (instantaneous heater)
D.H.W. System (NTC3 present)
00 = Hot water off
01 = Hot water on + pump running
continuously with hysteresis of -5
°
C on
T
set
(Phase 1)
02 = Hot water on with hysteresis of -5
°
C
on T
set
(Phase 1)
03 = Hot water on with hysteresis of -10
°
C
on T
set
(Phase 1)
04 = Hot water on with hysteresis of -20
°
C
on T
set
.(Phase 1)
05 = Hot water on with hysteresis of -30
°
C
on T
set
.(Phase 1)
Phase N
°
1
2
When setting has been
completed press
62
COMPONENTES PRINCIPALES
DESCRIPCIÓN
1 Purgador del aire
2 Electrodo de control
3 Ventilador
4 Electrodos de encendido
5
Tarjeta
6 Transformador
7 Presostato humos
8 Sonda de retorno NTC 2
9 Sonda del circuito sanitario NTC 3
10
Circulador
11 Presostato falta de agua
12 Grifo de llenado
13 Hidrómetro
14 Botón “-” para disminuir los valores
15
Botón
“+”
para aumentar los valores
16 Botón “store” para memorizar los
datos
17 Botón “step” para seleccionar los
parámetros que hay que visualizar
18
Botón
“mode”
para seleccionar el
programa
19 Pantalla para visualizar los datos
20 Botón “reset” para desbloquear la
caldera
21
Selector Verano/Invierno
22 Interruptor general
23 Centralita de mando
24 Válvula de 3 vías
25 Calentador de agua caliente sanitaria
26
Válvula de gas
27 Cuerpo de la caldera de aluminio
28 Sonda ida NTC 1
A
Ida instalación Ø 3/4”
B Salida agua caliente sanitaria Ø
1/2”
C Entrada gas Ø 3/4”
D Entrada agua fría sanitaria Ø 1/2”
E
Retorno instalación Ø 3/4”