background image

29 

-  

Remove the basket from its housing and clean 

it carefully.  
 

WARNING! 

The basket for vegetables is 

made of stainless steel. 
 
During its cleaning do not beat it against the floor. 
Handle the basket with care and visually check that 
there is no splintered parts.  
 

 

WARNING!

The basket should be 

washed with automatic washing systems 
/ex.Dishwashers) which guarantee its sanitization. 
 
In case of damaged/cracked parts, replace the basket 
with a new one. 
 

 

WARNING! 

For a better 

security,we suggest to replace the basket with a new 
one at least once a year 
 

Take filter boxes away and wash them by 

 

means of the shower. 

 

Wash    decantation   tanks   and drain . 

 

Wash level devices. 

 

 

 
-  

Replace filter boxes inside the tank. 

 
 

NEVER WASH THE EXTERNAL PART  OF 
THE MACHINE WITH A WATER JET 
 
-

 

Never leave tools, parts or other loose 
material in or on the machine; 

 

-

 

Chek that there are no rusting foreign 

bodies, because of the material “stainless steel” 
could begin to rust. Rust particles can come from 
non- stainless steel  dishes or damaged wire 
baskets.  
 

Do not wash the machine  and the area 

surrounding it with fire hydrants, steam jets of 
high-pressure cleaners; 
 

When clearing the floor  be careful not to 

saturate the base of the machine, in order to 
avoid a  prolonged stagnation of water; 
 

To clean the inside of the machine, use a 

brush or a soft cloth; 
 

To clean the machine do not use abrasive 

cleaners; 
 

-

 

BEFORE starting machine or cycle, after 
any maintenance or repair work, make sure 
all protectives are correctly installed; 

 

 

 

WARNING!

 : Before carrying out 

the maintenance operations, disconnect the 
equipment from the mains power supply: 

 

USEFUL ADVICE 

 

The choice of Wash and Spin times depends on 
the characteristics of the product. In fact, the 
degree of dirt on the Vegetables themselves, 
their consistency or delicacy, can influence the 
duration of the 

Wash 

time, which is usually 2 

minutes. 
 
The A-81 Vegetables Washer is supplied with a 
water 

flow regulator (OPTIONAL) 

which acts 

on the force of the Wash, increasing or 
decreasing the water flow pressure of the Wash.  
 
This allows the possibility of different types of 
Wash depending on the consistency or delicacy 
of the product. 
 
As far as 

Spin 

times are concerned, 1 minute is 

usually enough. 
 
You can adjust rotational speed and washing 
times according to your requirements and the type 
of vegetables to be washed up (see program set-
up paragraph). 
 
You may also choose as an option a special thin-
mesh or large-mesh basket (OPTION) depending 
on the type of vegetable. 
 
To wash 

mushrooms

 it is advisable to  use a 

Gentle Wash and longer Wash times. 
 
If the machine is to be used to wash 

fish

, the 

following must be kept  in mind: 
 

Содержание AA-08101





































































Отзывы: