LAMBDA OMNICOLL Fraction Collector - Sampler
Operation MANUAL 2023.01
www.lambda-instruments.com
8
Figure 1.4.1-6
Insert the rectangular bar into the
bar holder as shown.
Figure 1.4.1-7
Slide the right end of the bar
through the opening on the guide plate.
Figure 1.4.1-8
Screw the bar holder on the
moving arm of the fraction collector with the
corresponding socket key (hex-key).
Use e.g., a thin spatula to push the screw
through the moving arm.
Figure 1.4.1-9
Slide the tubing guide into the
tubing guide holder, so that a convenient height
above the tubes is obtained.
Fix the tubing guide to the holder using the
corresponding socket key (hex-key).
Figure 1.4.1-10
Place the tubing guide holder at
the desired fraction position and secure it with
the socket head screw using the corresponding
socket key (Allen key).
Figure 1.4.1-11
Place the tubing guide holder in
position above the first fraction of each stream
(channel).
If 4 streams are collected in a row, the place:
first tubing guide over tube no. 1,
second tubing guide over tube no. 4,
third tubing guide over tube no. 7 and
fourth tubing guide over tube no. 10
For more information about the multiple stream mounting, please do not hesitate to contact
us
