LAMBDA OMNICOLL Fraction Collector - Sampler
Operation MANUAL 2023.01
www.lambda-instruments.com
17
3.3.2 Coding Y-axis for row distance
Measure the distance between rows. When several tube racks are used, pay attention to the
difference in distance between the last row of the first rack and the first row of the second
rack.
Figure 3.3-5
Mark the row distance with a pencil
on the coding band for Y-axis and draw the
white lines with the provided correction pen.
Figure 3.3-6
Place the coding band on the left
internal side of the metal frame just under the
gear bar.
If the fraction collection should be stopped at the last row, then make the last line broader
(approximately 1 cm thick). This functions as the stop signal.
Since the coding band is kept in place by magnetic force, it can be easily positioned.
When the control unit is placed in the starting position on the front of the
frame, the photoelectric detector on the left side of the control unit must be
situated before the first line. Otherwise the control unit will stop at the
position of the next row.
The first row line of the Y-axis should be ca 10 cm from the front.
3.4 Control Panel of OMNICOLL Fraction Collector
