LAMBDA OMNICOLL Fraction Collector - Sampler
Operation MANUAL 2023.01
www.lambda-instruments.com
3
1 SETTING UP THE FRACTION COLLECTOR
1.1 Assembling the fraction collector
The setup of the fraction collection - sampler, LAMBDA OMNICOLL is very easy - a short
video of the installation can be found at
www.youtube.com/watch?v=33J9U_2-b-o
Figure 1.1-1
Push the first tub-sheet into the
slots on one of the shorter sides of the yellow
support.
Figure 1.1-2
Push the second tub-sheet into the
slots on another shorter side of the yellow
support.
Figure 1.1-3
Insert the black frame into the
corresponding slots of the yellow supports
Figure 1.1-4
Pay attention to proceed at the
same speed on both sides otherwise it will end
up in blocking. The tub-sheet should not slip out
of the slots.
Figure 1.1-5
Fix both frames in position with
four bolts.
Figure 1.1-6
Tighten it securely with the help of
the provided hexagonal key.
