Lakeshore 336, Руководство пользователя, Страница: 146 / 192

134 c
HAPTER
6: Computer Interface Operation
Model 336 Temperature Controller
HTRSET? Heater Setup Query
Input
HTRSET? <output>[term]
Format n
<output>
Specifies which heater output to query: 1 or 2.
Returned <htr resistance>,<max current>,<max user current>,<current/power>[term]
Format n,n,+n.nnn,n
HTRST? Heater Status Query
Input
HTRST? <output>[term]
Format n
<output>
Specifies which heater output to query: 1 or 2.
Returned <error code>[term]
Format n
<error code> Heater error code: 0 = no error, 1 = heater open load, 2 = heater short.
Remarks Error condition is cleared upon querying the heater status, which will also clear the
front panel error message
IEEE IEEE-488 Interface Parameter Command
Input
IEEE <address>[term]
Format nn
<address>
Specifies the IEEE address: 1–30. (Address 0 and 31 are reserved.)
Example IEEE 4[term] —after receipt of the current terminator, the instrument responds to
address 4.
IEEE? IEEE-488 Interface Parameter Query
Input
IEEE?[term]
Returned <address>[term]
Format nn (refer to command for description)
INCRV Input Curve Number Command
Input
INCRV <input>,<curve number>[term]
Format a,nn
<input>
Specifies which input to configure: A –D (D1–D5 for 3062 option).
<curve number> Specifies which curve the input uses. If specified curve type does not
match the configured input type, the curve number
defaults to 0. Valid entries: 0 = none, 1–20 = standard
curves, 21–59 = user curves.
Remarks Specifies the curve an input uses for temperature conversion.
Example INCRV A,23[term] —Input A uses User Curve 23 for temperature conversion.
INCRV? Input Curve Number Query
Input
INCRV? <input>[term]
Format a
<input>
Specifies which input to query: A–D (D1–D5 for 3062 option).
Returned <curve number>[term]
Format nn (refer to command for description)