Lakeland EASY FILL, Инструкция пользователя

Страница: 4 / 17

6 7
BEFORE USING YOUR IRON FOR THE FIRST TIME
Please check that the iron voltage rating corresponds to your mains voltage. Remove any stickers
or protective covers from the soleplate. When the iron is first used, you may notice some vapour
being released for a short while. This is perfectly normal.
1. Unwind the power cord.
2. Fill the iron as described below in ‘Filling the water tank’.
3. Plug the power cord into the socket and switch on. The pilot light will be lit for a second to
show the iron is on.
4. Turn the temperature dial clockwise to ‘MAX’ position.
5. The pilot light will come on again to show the iron is heating up, it will turn off when the
required temperature is reached.
6. Turn the steam control dial to Steam will come through the vents on the soleplate.
7. Iron a tea towel or a piece of cloth and when the water tank is empty the iron is ready for use.
FILLING THE WATER TANK
For best results always make sure there is enough water in the tank when ironing. Use de-
mineralized water or distilled water. Do not use chemically de-scaled water or any other liquids.
1. Unplug the iron.
2. Slide the steam control dial to
DRY position.
3. Open the water tank cover as shown below.
4. Hold the iron with the base uppermost. Use the water jug to fill the iron pouring until the
MAX level is reached. Never fill the water tank level beyond this point.
5. Close the water cover firmly.
• CAUTION; The plastic bags used to wrap this appliance or the packaging may be
dangerous. To avoid risk of suffocation, keep these bags out of reach of babies and children.
These bags are not toys.
• Do not use this appliance if the lead is damaged. Never attempt to repair the iron or replace
the cover yourself as this may lead to severe injury or electric shock. If the lead is damaged
it must be replaced with a special lead: please contact the Lakeland customer care team on
015394 88100.
• Always ensure that your hands are dry before removing the plug from the mains socket. Never
pull the plug out of the mains socket by its lead.
• Unplug from the mains when not in use and before cleaning. Allow to cool before cleaning the
appliance. To disconnect, turn the socket to “off “and remove the plug from the mains socket.
• To protect against fire, electric shock or personal injury, do not immerse the iron, power cord,
or plug in water or any liquids.
• This iron must always be plugged into an earthed socket.
• To avoid injury or possible fire, do not cover the appliance when in use.
• Do not touch the surfaces marked with symbol during or just after ironing. They are hot!
CAUTION: HOT SURFACE!
Pull the handle
upwards to open
the water tank
cover
Do not exceed
the MAX level
when the iron
is upright