Lakeland EASY FILL, Инструкция пользователя

Страница: 5 / 17

8 9
INSTRUCTIONS FOR USE
DRY AND STEAM IRONING
To ensure a good output of steam, always keep the water tank at least a quarter full. Steam ironing
is only possible at higher ironing temperatures, (•• or ••• dots or the MAX setting).
1. Fill the iron as described in ‘Filling the Water Tank.’
2. Set the steam control dial to
3. Connect the power cord to the socket and switch on. The pilot light will be lit for a second to
show the iron is on.
4. To begin ironing, stand the iron upright and turn the temperature dial to your required
temperature.
5. The pilot light will show the iron is heating up and will go off when the required temperature
is reached.
6. The iron is ready for use.
7. The steam control dial allows you to choose the ideal steam output for each garment. Rotate
backward for more steam, rotate forward for less steam, rotate fully forward for no steam.
8. To iron without steam, slide the steam dial to DRY. Then select the desired temperature as
normal.
9. To switch off, turn the temperature dial to ‘MIN’.
10. Unplug the iron.
11. After every use follow the instructions in ‘Draining the water’.
SPRAYING
Aim the spray nozzle at the area and press the button a couple of times to dampen the fabric
with a fine mist of water. Delicate or synthetic fabrics, which must be ironed at low temperatures
without steam, may be sprayed. Use the spray button for stubborn creases; check there is enough
water in the tank before spraying. You may need to press the spray button a few times to start
the function.
STEAM SHOT
The steam shot gives an extra burst of steam to help you smooth out stubborn creases and
wrinkles. It’s particularly helpful on denim and linen, and it can be used whether you are ironing
with or without steam.
1. Turn the temperature dial to ‘••• (3-dot) or MAX’ position, this button can only be used at
higher temperature settings.
2. Pilot light will go off when the required temperature is reached.
3. Lift the iron slightly above the fabric and press the steam shot button down firmly.
4. Release the button as you iron, so that an intense surge of steam penetrates deep into the
fibres. For optimum steam output, wait at least 4 seconds before pressing the steam shot
button again. It may be necessary to press the button a few times to start this function.
5. For a stronger burst of steam, slide the steam selector to DRY.
VERTICAL STEAM SHOT
Vertical steam is especially useful for taking the creases out of curtains or suits and garments
on hangers. Follow the instructions in ‘Steam Shot’ but hold the iron upright between 15 to 30
centimetres away from the fabric to avoid scorching.
CAUTION: Please ensure that children are well away when you press the steam shot button. Keep
your fingers at a safe distance from the tip of the soleplate to avoid burning. Never iron clothes on
the body, and never direct the steam towards people. You do not get a continuous flow of steam
on this setting.
Move dial forward for less steam
and fully forward for no steam
Move dial backwards for more steam
Spray Button
Spray button
Steam Shot button