8
SETTING UP THE DEEP FAT FRYER AND USING FOR
THE FIRST TIME
1. Unpack the Fryer, basket and basket handle. Remove all the packaging materials.
WARNING: Do not
plug in the appliance when the control panel is not fully
assembled and installed on the base unit. Only plug in the Fryer when the unit is
fully assembled and the heating element is immersed in oil.
2. Wash the tank, base unit, lid, basket and basket handle in warm soapy water,
dry thoroughly.
WARNING: Do not
immerse the control panel, cord or plug in water.
3. When you first use the Fryer there may be an odour, this is normal and will stop after
a few uses.
4. Before first use, fill the oil tank with oil to the MAX level, heat it for about
10 minutes at 150ºC, let it cool down completely, then drain out the oil.
ATTACHING THE CONTROL UNIT TO THE BASE UNIT
1. To attach the control panel to the base,
make sure the tank is already inside the
base unit.
2. With the heating element facing the
direction of the tank, slide the control
panel onto the control panel mounting
plate situated on the back of the
base unit.
3. Make sure the control panel is secure,
as an automatic safety switch will
prevent the appliance from switching on.
Control panel
mounting plate
Control
panel
