6
7
• To avoid injury or possible fire, do not cover the appliance when in use.
• Do not connect this appliance to an external timer or remote control system.
• An extension cable may be used with care. The electrical rating of the cable should be at least
as great as the appliance. Do not allow the cable to hang over the edge of the worktop or
touch any hot surfaces.
• This appliance complies with the basic requirements of Directives 04/108/EC (Electromagnetic
Compatibility) and 06/95/EC (Safety of Domestic Electrical Appliances)
• WARNING; A cut off plug inserted into a 13amp socket is a serious safety (shock) hazard.
Ensure the cut off plug is disposed of safely.
•
CAUTION; the plastic bags used to wrap this appliance or the packaging may be
dangerous. T o avoid risk of suffocation, keep these bags out of reach of babies and children.
These bags are not toys.
• Do not operate the blender empty.
• Do not lift or move the blender whilst in use.
• Never leave the blender unattended.
• Do not blend more than the maximum capacity
• Keep the jug empty when not in use, do not store items in the jug.
• Care must be taken when mixing hot liquids and foods as excess pressure may build up
inside the blender and this could cause the lid to come off and the contents to splash out.
We recommend that you avoid mixing excessively hot foods, allowing them to cool to room
temperature before blending.
• Do not use the blender for very hard food products, such as bones, shelled nuts, frozen meats
etc. This could damage the blade or cause the motor to seize.
• The blender is equip with a security function. The blender can only be switched on if the jug is
locked in the engine base correctly.
• CAUTION! The blades of the jug are very sharp. Care must be taken when handling the sharp
cutting blades, emptying the jug and during cleaning.
• Never reach into the blender jar with your fingers or with a spatula which the blender is
running.
• Do NOT use the blender continuously for more than 2 minutes
• Allow the blender motor to cool down between processing cycles
• Let hot liquids such as soups cool to room temperature before blending. Never blend hot
liquids.
THE CONTROL PANEL AND PROGRAMMES
• If the blender jug is correctly locked into the motor base the control dial will illuminate for one
second which means power is connected and the blender is ready to go
• During working mode the blue light around the dial will light up
• The blender has variable speed control and 3 functions – PULSE, ICE and SMOOTHIE
• Each of the function buttons will illuminate when selected
PULSE – creates a burst of power for quick blending. The PULSE function can be used to break
apart large pieces of food or to control the texture of food when chopping. The PULSE function
only operates for as long as it is pressed
ICE – provides short powerful bursts (operates as a pulse function). Continue with the ICE function
until the ice is crushed to the desired consistency. Do not put too many cubes into the blender for
crushing; it is better to do larger quantities in smaller batches. Press the ICE function again to stop.
SMOOTHIE – for powerful blending. Press the SMOOTHIE function again to stop.
OTHER FEATURES
The blender is equip with a security function. The blender can only be switched on if the jug is
locked in the engine base correctly
The blender motor unit has non slip feet
How to assemble the blender and using for the very first time
• Clean the measuring cup, lid and blender jug before first using
• Make sure the blender unit is turned off
• Fit the blender glass jug onto the main body, turn it slightly in a clockwise direction so it locks
into the motor unit. The blender will not work if the jug is not installed correctly on to the
motor unit.
• Fill the jug with the desired foods for blending
• DO NOT USE THE BLENDER WITHOUT ANY FOOD OR LIQUID INSIDE
• Put the lid on top of the blender jug and push it down. Always ensure the blender lid is firmly
in place before operating
• Insert the measuring cup into the cover lid, turning until it locks into place
• Ensure the turning knob is ‘OFF’ before connecting the power
• The blue light of the speed dial will light up for one second, which means power is connected.
