Sentrius RG1xx
User Manual
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/ramp
14
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
5.1
IPv4 Configuration
The default page for configuring the Ethernet LAN connection is the IPv4 Configuration page. There are two
basic modes of operation: DHCP and Static. These are selected in the IP Address Acquisition Method drop-down
box (
Figure 10
).
Figure 10: IPv4 Configuration page
DHCP – When in DHCP mode, all settings are provided by the DHCP server. All configuration settings
(except IP Address Acquisition Method) are greyed out. IP values provided by DHCP are displayed but
cannot be changed.
Static – When the IP Address Acquisition Method is set to static, all IP settings are fixed and saved in the
device. The external Gateway IP Address is optional and may be left blank. DNS Server IP addresses are also
optional. Zero, one, or two DNS servers may be specified.
5.2
IPv6 Configuration
Select the IPv6 configuration by clicking the IPv6 menu item in the side menu of the LAN view (
Figure 10
). The
IPv6 configuration settings are shown below.
There are two fully-supported modes for IPv6 addressing:
DHCP – In DHCP mode, all settings are provided through communication with an IPv6 server on the
network.
Auto – In auto mode, you have the option of selecting the auto DHCP method (either stateless or SLAAC).
As of June 2017, IPv6 static mode is only partially supported. Please see the software release notes for
current information.
Содержание Sentrius RG1 Series
Страница 1: ...A User Guide Sentrius RG1xx Version 1 1 ...