Laipac Technology Inc.
20 Mural Street, Unit 5, Richmond Hill Ontario L4B 1K3 Canada
Tel: 905-762-1228 | Fax: 905-763-1737 | E-mail:
|
http://www.laipac.com
7
2. Getting Start
2.1 How to set-up SF-Aire?
The steps below outline what should be accomplished in order to operate SF-Aire.
Detailed descriptions of these steps will be described in the following sections.
1. Ask your tracking service provider to open a service account on the service platform
2. Ask the Password of this device under its service account
2.
Install a valid SIM card on the device
a. If SF-Aire has never been set up on your computer
3.
Find a computer with Microsoft Windows 7/8, internet access, IE 9 browser and
Adobe Flash Player 9.0 or above
4.
Install the latest version of LocationNow Suite utility software
5.
Connect SF-Aire to the computer though a USB cable
6.
*Install USB driver on computer
7.
Disconnect SF-Aire with computer
8.
Run utility
9.
Connect it to the computer again
10.
Utility will check the firmware version and remind if device should update its firmware
11.
Configure the device
12.
Disconnect unit with computer
13.
Reset device to have it start working with the desired tracking service platform
b. If your computer has been used to set up SF-Aire before
In this case, user can skips steps 5 to 8, which are for installation of USB driver.
Note:
* For computer being with Windows 7/8, if user fails to install SF-Aire’s USB driver by using
computer’s auto-installation process, he needs try pre-installation process. Please find the
detail in Section 4.2.