Laipac Technology Inc.
20 Mural Street, Unit 5, Richmond Hill Ontario L4B 1G5 Canada
Tel: 905-762-1228 | Fax: 905-763-1737 | E-mail:
|
http://www.laipac.com
31
6.4 APPLICATION
6.4.1 APPLICATION
Speed & Mileage
Over Speed Alert:
In order to use this function, it must be enabled first. Device is
capable of sending an alert if it moves faster then the specified
speed limit value.
Speed Limit:
The speed limit is user defined and can be set in Km or miles
per hour. If the unit travels faster than this value, an Over
Speed Alert will be sent to server.
Mileage Accumulator:
This function must be enabled before it can be used. SF-Aire is
able to accumulate distance based on a user defined “Mileage
Starting Value” and the unit of distance during device moves.
Whenever moving distance is increased by 1(km/mile), the
incremented value will be added to the
Accumulator
’s current
mileage value.
Starting Value:
It is defined b user and is recommended to match the odometer
reading in the equipped vehicle. From there user can specify
the unit of distance being kilometers or miles and the mileage
value will accumulate from there.
Mileage Alert:
This alert must be enabled before it can be used. This alert will be
sent to the remote server whenever another new Mileage Delta value
is reached during vehicle running. It is used to generate a warning
for vehicle maintenance warning or oil change. For example, if
Mileage Start Value is 0 km and
Mileage Delta Value is 5000km, unit
will
generate
Mileage Alerts when
Mileage Accumulator has its reading
at 5000 km.
Mileage Delta Value:
This value is a user defined distance value. It is designed to
provide a warning related to the next vehicle maintenance or oil
change job is due. The unit of distance must be the same as the
‘Mileage Starting Value’. The default setting for this value is
1000 km