laguna Sheartec II JX 8, Руководство пользователя, Страница: 29 / 47

JX|8 Sheartec:II Jointer \ Wiring 27
Straight Edge
Figure 23: Checking Outfeed Table
STEP 3: Use a hex wrench (not included) to loosen Screw Lock (S.L) to release outfeed table adjustment lever as shown
in FIG. 24 .
Outfeed Table Adjustment Lever
Figure 24: Screw Lock (S.L)
STEP 4: Loosen cap screw on the back (inside) of the outfeed table adjustment lever as shown in FIG. 25. Lower the
outfeed table to adjust the straight-edge level with the top dead center of the knife inserts as in FIG. 23 .
NOTE: When the half-moon shape of the CAP screw indicator touches the plate, it results in the lowest position of the
outfeed table and is a reference to the top-dead-center of the inserts.
S.L.
Loc