Laguna Tools PFLUX2, Руководство пользователя, Страница: 27 / 50

Mobile Dust Cyclone Manual
26
31. Attach the handles to the top and
bottom end on the front panel with
the window display using (4) flat head
Philip
bolt, (4) 5/16” x 7/8” flat
washers and (4) 5/16” hex nuts. Note
that the head of the Philips bolt must
be inserted from the handle with the
hex nut and washer on the inside of
the drum.
32. Take the Octagon drum front and
back panels and assemble by securing
with (12) M4 x 12mm sheet metal
screws.
33. One the left and right side you will
find three bolt holes. Take the
matching side plate and secure to the
outside of the panel using (6) 1/4” x
1/2” carriage bolts, (6) 1/4” x 1” flat
washers and (6) 1/4” hex nuts. Insert
the head of the carriage bolt from the
inside of the drum with the washers
and nuts on the outside of the drum.
34. Lay the drum on its side with the
handle facing up. With the help of
another person, hold the base panel
with wheels up against the base of the
drum. Using (22) M3 x 6mm Truss head
Philips flat point screws and M3 cap
nuts secure and fasten tightly. Make
sure the head of the truss head Philip
screw is on the inside of the drum. The
cap nut is secured from the outside.
Otherwise, this will cause air leakage,
regardless of silicone being applied.
View of right side of panels