Laguna Tools MSANWB43X75-2RK-25-0197, Руководство пользователя

Страница: 17 / 43

ADJUSTMENT --
SANDING BELT TENSION SANDING BELT TRACKING
The tension of sanding belt is controlled by an air cylinder. Turn the If the sanding belt runs outside of the normal track,
tension air switch to tighted or loosen the sanding belt tension. the machine will stop automatically. When replacing the
When the machine is not in use, release the sanding belt tension sanding belt, there may be a length tolerance between the
to avoid sanding belt fatigure. right and left sides of the belt which may result in the
incorrect tracking of the sanding belt. If this occures, it will be
"A" - Tracking Adjustment Lever
necessary to adjust the tracking:
"C" - Air Tension Switch
1. The degree of sanding belt oscillation to the right side
and to the left should be equal. For example, if the oscillation
time to the right is one second ,then the oscillation time to
the left is one second.
2. If the oscillation time to the right is one second, but the
oscillation time to the left is longer , then loosen the tracking
adjustment lever. See Figure 8 and move it to the left unit
proper tracking is achieved. When satisfied,tighted the lever.
3. If the oscillation time to left is one second, but the
oscillation time to the right is longer, then loosen the tracking
adjustment lever and move it to the right until proper
tracking is achieved. Tighten adjustment lever.
Figure 8
12