Laguna Tools MJO6012-0800-1phCSA, Руководство пользователя, Страница: 12 / 33

12
7.
Lift the control console so that it lines up with the fixing screws. While you are
lifting it into place, feed the cables through into the body of the jointer. Prior to
attaching the control console check that neither of the cables are under the
mounting flange. Secure in position with the fixing screws.
8. Remove the fixing straps that secure the fence to the base of the box.
Lift the fence off the box and put to one side.
9. The jointer is now ready to be lifted off the base of the box.
10. Remove the jointer from the box base with a fork lift of sufficient capacity. The
jointer weighs 1254lb [570 kg] [dependant on the machine purchased]. Remove the
box base and lower the jointer to the floor.
11. Remove the cutter guard by loosening the
clamp screw and lifting it out.
Side fixing screws
Casting mounting screws
Control console
Control cables
Control console with the
wrapping removed
Control cables
Control console
fixing screws
Clamp screw Cutter guard