Laguna Tools MJO6012-0800-1phCSA, Руководство пользователя, Страница: 10 / 33

10
Fence
The fence is used to keep the job square to the cutter head and is also used to
produce angle cuts on the edges of panels. The fence can be adjusted from 90 to 45
degrees.
Cutter head Guard
The guard is there to protect you. Always adjust the guard to expose only the
minimum amount of cutter to suit the job width.
Dust port
The dust port is designed to allow maximum extraction of saw dust and wood
chippings. Connect a 5
” flexible dust collection hose between the machine and your
dust extraction system.
Note: The stronger the dust collector the better.
Table height adjusting handles
The hand wheels adjust the tables to the required height.
Body
The body of the machine supports the table etc. It provides a heavy base that is
designed for rigidity.
Start & stop switches
These switches are used to start and stop the machine.
Serial and data plate
This plate is mounted on the back of the machine.
Where to locate your Machine
Before you unpack your machine select the area where you will use your machine.
There are no hard and fast rules for its location, but below are a few guidelines.
1. There should be an area around the machine suitable for the length of wood that
you will be machining.
2. Adequate lighting. The better the lighting, the more accurately and safely
you will be able to work
3. Solid floor. You should select a solid flat floor, preferably concrete or something
similar.
4. Locate the machine close to the power source and dust collection.