background image

Read and Carefully Follow Instructions !

Basic safety precautions must be followed including:

HAZARDOUS TO UNATTENDED CHILDREN!

Risk of ChildRen dRowning.

  Extreme caution must be used to 

prevent unauthorized access by children.  To avoid accidents, ensure that 

children cannot use a spa unless they are supervised at all times.  To reduce 

risk of injury, do not allow children to use this product unless they are closely 

supervised at all times.  To reduce the risk of injury, lower water temperature 

when spa is used by children.  Lower water temperatures are recommended 

since children are especially sensitive to hot water.

DO:

Make sure you always lock child resistant locks on the spa cover after use 

for your children’s safety.  

Every Laguna Bay Spa is equipped with a locking 

cover that meets the ATSM F1346-91 Standard for Safety Covers.  There is no 

representation that the use of the cover, locking clips or actual locks will not 

prevent access to the spa. 

Test the water temperature with your hands 

before allowing children to enter 

the spa to be sure that it’s comfortable.  Children are especially sensitive to hot 

water.

Remind children that wet surfaces are slippery.

  Make sure that children are 

careful when entering and exiting the spa.

Check with local authorities regarding fencing requirements

 for spas in 

your area.

DON’T:

Allow children or pets on the spa cover.

  Most spa covers have a maximum 

weight load of 20 lbs.  Covers are strong enough to withstand the weight of one 

foot of snow.  They are not designed to support the weight of people or pets.  

Sitting on the cover may cause the foam inserts to break.

Allow children to have unsupervised access to the spa.  

Children should 

always be in the company of a responsible adult to make sure children do not 

have access to the spa.

IMPORTANT INFORMATION 

ABOUT SPA SAFETY

4

Содержание Spa












































Отзывы: