Laguna Bay Spas Spa, Руководство пользователя

Страница: 16 / 43

220V Installation
If your electrician has questions about the wiring
instructions, please call Laguna Bay Spas Technical Assistance prior
to starting installation at (877) 722-4097. Factory trained technical
service specialists are available to answer questions during their normal business
hours Monday through Friday from 8:30 am to 5 PM est.
Correct wiring of the electrical service box,
GFCI box and pack terminal block
is required. Spas installed for 220v operation require a 4-wire, 50 amp or 60 amp
(depending on the spa model), 220 volt subfeed in non metallic pipe to the spa
equipment compartment.
US and Canadian GFCI Wiring Diagram
The black and red wires from the
electrical box must be connected
to the input of the GFCI.
The white wire
from the
electrical box must be connected
to the neutral bus.
The green or copper wire
must
be connected to the ground lug of
the GFCI.
The black, red and white
wires going to the spa must be
connected directly to the output
of the GFCI.
The neutral to the GFCI must be
connected to the neutral bus.
The green or copper wire
going
to the spa must be connected to
the ground lug.
Electrical Information
Main Service
Panel
Spa GFCI Panel
must be accessible but
at least 5 feet (1.5m)
from the spa.
16