Lacunza ITACA 100, Инструкция

Страница: 27 / 44

INSTRUCTIONS OF USE 26
3.
3.9. Electrical system
Forced convetion. Fans
Itaca C/V models have a fan for the
forced convection of the hot air generated
around the appliance inside the shell. This
air can be piped to other rooms.
IMPORTANT: This appliance is not
covered by our warranty unless directly
connected to the mains electricity supply in
accordance with the conditions described
in the relevant section in 1.1.
Itaca appliances with the C/V option
(forced ventilation with fan) come with the
following parts:
Parts and characteristics:
•
Fan:
- Maximum input power:
275/285 W, 230V, 50/60Hz.
- Speed (r.p.m.): 1250
- Air flow (m3/h):820/910
•
Thermostat sensor: ON/OFF at
50ºC
•
Potentiometer: see technical data
in the manual supplied
Potentiometer operation:
By means of its rotating lever, the
potentiometer controls the flow of hot-air
output from the appliance in two ways:
•
Automatic mode:
The fan automatically starts working at
the set speed via the thermostat. When a
fire has been lit in the firebox and the
thermostat reaches a temperature of
approximately 50ºC, the fan starts working
at the power set on the potentiometer
(rotating wheel) and stops automatically
when the temperature drops beneath
50ºC.
•
Manual mode:
The fan works at the speed set using the
rotating wheel independently of the
thermostat, i.e. the fan can be started up
before the thermostat reaches 50ºC.
•
Safety function
This means that even though the
potentiometer is switched OFF via button
ON/OFF, the fan continues to work at low
revolution speed /
at the speed indicated
or will come on at the speed to which it
was set before being switched off when
the thermostat detects a temperature
over the safety function activation
temperature that has been set.
Figure No.39 - Itaca potentiometer display
For more information (e.g. deactivate
the safety function), see the potentiometer
instruction manual.