Lacunza ITACA 100, Инструкция

Страница: 21 / 44

INSTRUCTIONS OF USE 20
3.
Double-combustion air intake
By opening this inlet, air enters the
combustion flame, making for more
efficient and less polluting combustion
because post-combustion takes place,
burning the particles which were not
burned in the first combustion. This
increases the performance of the appliance
and reduces emissions.
On Itaca models, the double-
combustion air intake is the same as the
secondary-air intake (both air intakes are
controlled through the same inlet at the
same time).
IMPORTANT: The appliance is exposed to
extreme changes in temperature and may,
as a result, make noises when in operation.
These noises are a natural result of
expansion/contraction of the parts which
make up the appliance. Do not be alarmed
by noises of this kind.
In order to obtain maximum output,
open all the air intakes to the firebox and
in order to obtain minimum output, tend
towards closing them. If you wish the fire
to liven up quickly, temporarily raise the
guillotine door one or two centimetres to
make oxygen enter the firebox quickly. For
normal use, we recommend you close the
Primary Intake and leave the Secondary
and Double Combustion Intakes open.
3.6. Removing ash
Following sustained use of the
appliance, it is necessary to remove the ash
from the firebox. Remove the ashpit box
when cold or using something to prevent
yourself from getting burned (glove).
Never throw hot embers into the
rubbish.
Access the ashpit by opening the door
on the appliance.
3.7. Deflectors.
3.7.1. Itaca 80
The appliance has 4 deflectors. The
upper one is fixed, whilst the other three
can be dismantled.
You can see how they are fitted in the
following pictures.