background image

Troubleshooting

29

LaCie Dupli Disc CD121

User’s Manual

The Problem

The CD-RW drive’s tray will not open.

The CD-RW drive automatically ejects a
CD when you try to record on it.

The CD-RW drive is not writing to CD
correctly.

Questions to Ask

Has a running software program locked
the eject function?

Is the CD already full?

Does the CD-RW drive support the for-
mat of the CD you have inserted?

Is the CD media damaged?

Have the LaCie CD Utilities been
installed correctly?

Has buffer under-run occurred (has
something interrupted the stream of data
to the recorder)?

Is the CD-R/ CD-RW media bad or
scratched?

Possible Solutions

To check, turn off the drive, disconnect
the USB and power cables, reconnect
only the power cable, and press the eject
button.

Verify the contents of the CD and try
recording on a blank one. 

Check section 

2.2 Supported CD

Formats

.

Carefully inspect the disc. If in doubt, try
another CD media.

Reinstall LaCie CD Utilities.

• Disable all other software programs
that are running during the CD record-
ing session.
• Disconnect your computer from the
network, if you are using one. On a
Mac, deactivate File Sharing.
• Check to see that your hard drive is
fast enough.  
• If recording from CD or DVD-ROM to
CD, make sure that the speed of the
source device is high enough to provide
a sufficient data stream to the CD-RW.
Reduce the write speed of the CD-RW
using the appropriate menu in the LaCie
CD Utilities.

Check your CD-R/ CD-RW media and
try writing to a different disc.

Содержание CD121








































Отзывы: