Using Your LaCie Drive - Stand-Alone Mode
21
LaCie Dupli Disc CD121
User’s Manual
Warning!
Do not insert a data or audio CD in the upper tray while using the Firmware Mode. Doing so may
damage your LaCie Dupli Disc CD121.
1) Turn on the LaCie Dupli Disc CD121.
2) After powering on, the LaCie Dupli Disc CD121 will run through its initialisation and self-test processes, and then enter
Copy Mode.
3) Press the Mode button six times to move to Firmware Mode.
4) Insert the Firmware Update disc in the top tray.
5) Either press the Start button, or wait until the LaCie Dupli Disc CD121 emits five short beeps and automatically starts the
Firmware update.
At the end of the process, the OK LED lights to indicate that the process was completed successfully.
Eject the Firmware Update CD, and then turn your LaCie Dupli Disc CD121 off and then on to ensure that the Firmware
Update is properly initiated.
4.8. Autoplay Mode
Use this function to automatically play-back audio CDs. Connect speakers or headphones to the master tray’s audio jack in
order to hear the play-back.
1) Turn on the LaCie Dupli Disc CD121.
2) After powering on, the LaCie Dupli Disc CD121 will run through its initialisation and self-test processes, and then enter
Copy Mode.
3) Press the Mode button seven times to move to Autoplay Mode.
4) Insert an audio CD in the top tray, and playback will start automatically.
Содержание CD121
Страница 1: ...LaCie Dupli Disc CD121 User s Manual...