background image

Setting Up Your LaCie Drive

13

LaCie Dupli Disc CD121

User’s Manual

Initialization

The power supply LED at the bottom of the front panel lights up and the four LEDS at the top of the front panel light up for a
short time.

Important Note:

During initialization, if the Error LED remains lit, turn off the LaCie Dupli Disc CD121 and unplug

the power supply. Wait 10 seconds, and then re-connect the power supply and turn the drive back on.

Self-Test

Then the electronic board tests itself (components and LEDs).

Next, the Power LED lights up and remains lit. This means that initialization is finished and the duplication functions are
available. Your LaCie Dupli Disc CD121 is ready to use!

Important Note:

If the Error or all of the LEDs remain lit or are flashing for more than 30 seconds, the self-test has

failed. If this occurs, please turn off your LaCie Dupli Disc CD121 and turn it on again. If it fails again, contact your
LaCie reseller.

Speed and Mode

The LaCie Dupli Disc CD121 will automatically start recording at the default settings for the 

Speed

and 

Mode

unless they are

changed prior to inserting a master and blank CD. By pressing the 

Speed

button, you can decrease the recording speed by

increments of 1/4. For more information regarding the different 

Modes

, please refer to 

4. Using Your LaCie Dupli Disc

CD121 In Stand-Alone Mode

.

3.3. Connecting To Your Computer

You can also use your LaCie duplicator as an external CD-RW drive by connecting it to your PC or Macintosh via the USB
port. 

Important Note:

Your computer cannot detect the DVD-ROM drive of your Dupli Disc CD121 (the upper drive). Your

computer will only detect the CD-RW drive (the lower drive). You will not be able to utilize the DVD-ROM drive to
view DVD media.

Your LaCie Dupli Disc CD121 is shipped with LaCie CD Utilities for Macintosh and Windows. This software will enable you to
use your Dupli Disc CD121 to read and record data and audio files stored on your computer’s hard disk or on a disc in your
computer’s internal CD/DVD-ROM drive. 

Before connecting your LaCie Dupli Disc CD121 to your computer, please install the LaCie CD Utilities. 

Содержание CD121








































Отзывы: