![background image](http://html2.mh-extra.com/html/lacie/biggest-s2s/biggest-s2s_user-manual_3528771037.webp)
LaCie Biggest S2S
User Manual
page
Using Your Biggest S2S
4.4.1.5. Configure Safe + Big
The Safe + Big storage policy configuration mirrors
the concatenated disks to create a volume consisting of
four disk drives. The Basic Configuration Mode des-
ignates the remaining hard disk drive as a Hot Spare.
Before reconfiguring the Biggest S2S, delete previously
defined partitions. See 4.4.3.
Partition Configured Vol-
ume
, for details.
To create a Safe + Big volume
To open the Configuration Mode, select
Configure
Box
in the Edit menu or the corresponding button in
the Status window.
Select the
Safe + Big
radio button from the Con-
figuration Mode frame.
1.
2.
3. A confirmation box appears. Because the Basic Con-
figuration Mode affects all hard disk drives, a con-
figuration change may result in total data loss. Click
Yes
to complete the configuration.
TeChNICAl NOTe:
The volumes table below
the Storage Policy frame lists the volume label,
implemented storage policy and size.
4. Select
Save to Config File
from the File menu or
click the button in the toolbar to save the configura-
tion.
5. Click
OK
to build the configuration and close Con-
figuration Mode window. This configures the drives
using the Safe + Big storage policy.
Within a minute, the Status window will reflect the
implemented Safe + Big storage policy configuration.
Drive #4 is designated as the Hot Spare. The remaining
hard disk drives are allocated to the Safe + Big volume.
6. Partition the configured volume to complete the im-
plementation. See 4.4.3.
Partition Configured Vol-
ume
, for details.