Ultimate-cell Stackable Shaking Incubator V2017.2
4
2. SAFETY PRECAUTIONS
The machine can be only operated by the trained and authorized person.
The maintenance can be only conducted by trained person, LABWIT or its authorized
agency.
The maintenance spare parts shall be provided by the manufacturer and LABWIT,
and users are not allowed to replace them without authorization.
It’s prohibited to use any materials that may cause overpressure, combustion or
explosion in the equipment. Any uncontrolled cultivation of toxic or pathogenic or-
ganisms is not recommended for this equipment.
The loading volume must not exceed 1/3 of the total volume of the flask.
Reduce the loading or the shaking speed until the equipment runs smoothly, if loud
noises or strong vibrations occur.
Do not expose equipment to inappropriate ambient conditions, such as temperature,
or humidity outside the stated operating range.
The power supply of the incubator shall be well grounded so as to prevent operators
from electric striking.
The electrical supply circuit to the incubator must confirm to all national and local
electric codes. Check the serial-data plate for voltage, cycle, phase and amperage
requirements before you connect the unit.
Do not pull out the plug when the unit is in use. Never drag on the wire to unplug the
unit.
A separate branch circuit is recommended to prevent loss of samples due to over-
loading or failure of other equipment on the same circuit.
A surge protector is recommended to avoid power-related faults.
In case of malfunction or burning smell, the unit must be unplugged immediately .Use
a circuit breaker to cut off the power supply. Continuance of abnormal state will end
up with fire as a result of overheating.
The electric power supply must be cut off in following situations:
When the insulation is damaged.
When opening the door of electrical power box. Opening the top/back cover
without cutting off power supply might result in electric shock.
When replacing the fuse. Replacing the fuse without cutting off the power supply
will probably result in electric shock.
When a malfunction occurs, mishandling will result in the further damage of the
equipment or accidental injury.
If you do not use the unit for a long period of time.
Wear personal safety kits, such as safety glasses, safety gloves, when operating
WARNING!
The section outlines the important safety precautions for both
personnel protection and operation of the equipment.
Negligence of the following instructions may lead to serious
hazards and injury
.