Chapter 3 - Checking Your Dario™ Glucose Meter
Checking Your Glucose Meter With Dario™ Control solutions
23
A Connecting... message appears, followed by INSERT A NEW STRIP.
Verify that the meter is inserted as far as it can go into the socket of
the smart mobile device.
3.
Hold the test strip with the gold contacts facing the meter.
4.
Without bending the strip, insert it into the test strip port (marked in orange) of
the Dario™ glucose meter as far as it will go.
You are instructed to place a drop of blood on the test strip.
5.
Shake the control solution container and apply a drop of control solution to a
piece of paper.
6.
Hold the paper and move it so that the solution touches the tip of the yellow
window of the strip.
7.
Important:
Verify that enough control solution is applied to fill the window so
that it turns red. Do
not
put control solution on top of the test strip.
