Page | 6 Revision 1.4 15 January 2015
LabSat 3 media
LabSat 3 file formats
LabSat 3 uses I&Q binary data and runs the FAT32 file format. LabSat 3 files are recorded into a folder with
separate 2GB data files which will run sequentially when replayed. The folder description GPS_000 will
contain several files with the name format GPS_000_000.ls3. These will automatically increment.
LabSat 2 (.ls2) and LabSat (.bin) files will need to be converted to this format to play on LabSat 3. The
LabSat Scenario Converter Software is supplied on the LabSat 3 Hard Disk Drive (HDD). Please see the
section ‘Converting LabSat Scenarios’.
LabSat 3 SD Card
The 32GB SD card included with the LabSat 3 system includes the following files:
→
LabSat 3 sample scenarios
→
GPS_000 - Static 5 minute GPS scenario
→
GLO_001 - Static 5 minute GLO scenario
→
BDS_001 - Static 5 minute BDS scenario
→
LabSat 3 quick start video
→
SatGen simulation software video
→
LabSat 3 quick start guide PDF
LabSat 3 500GB Hard Disk Drive
The LabSat 3 500GB hard disk includes the following:
→
LabSat 3 scenario library description PDF
→
LabSat 3 quick start video
→
SatGen simulation software video
→
LabSat scenario converter utility
→
LabSat 3 scenario library – a worldwide selection of LabSat 3 scenario files with supporting KML and
Google Earth jpeg picture files.
The LabSat 3 HDD uses USB3.0 for fast data transfer and is formatted to FAT32.
LabSat 3 Label
The LabSat 3 label is located on the left side toward the rear. Please quote your serial number in all
correspondence.
