Page | 5 Revision 1.4 15 January 2015
Components
LabSat 3 has been designed to be portable and simple to use allowing virtually anyone to gather field test
signals without in depth training. Recording GNSS signals is as simple as positioning the antenna and
pressing one button. The sunlight-readable graphic display gives instant feedback of record status and can
show live histogram data to verify satellites in view during recording. Back at the Lab, recorded signals can
be replayed at the push of a button for repeatable, reliable testing.
LabSat 3 Front
LabSat 3 Rear
Name
Type
Description
POWER
2 pin LEMO
8 to 30 VDC Power Supply input
HOST USB
USB ‘A’
Connection of USB Storage devices
ETHERNET
RJ45
Remote access and control
USB
USB ‘B’
NMEA data output
RF OUT
SMA
Output RF signal
RF IN
SMA
Input RF signal (RP variants only)
REF
SMA
10MHz Reference Clock Input
Expansion
36 Way MDR
1PPS, Digital I/O*, CAN*, RS232*
*Model dependent – available as options.
Display
Keypad
SD Card
Slot
Media
LED
Indicator
