LabSat 3 Wideband, Руководство пользователя

Страница: 18 / 27

Page | 18 Revision 1.4 15 January
2015
Digital in/out
For recording events from an external source, LabSat 3 is equipped with a digital input (DIGI) and digital
output (DIGO) which can be found on the expansion connector at the rear of the device. Digital input is
pulled up externally to 5V. Digital out is a 5V level output. To enable the digital input for recording, go to
MENU

SETUP

DIGITAL

CH1 and then enable the tick against ‘ Digi ’ in the signal list. Then, during
recording, LabSat 3 will also record the state of DIGI (pin3 of the expansion connector). During replay, the
DIGO pin will output the recorded DIGI signal states.
Remote control
To enable LabSat 3 to be used for applications that require automated or remote control functionality an
application programme interface (API) is available together with a manual for communication via Telnet
over IP.

The LabSat 3 API is a Microsoft .NET API to allow functions of a LabSat 3 connected via LAN to be
accessed programmatically.

LabSat 3 is equipped with an Ethernet interface to allow remote control over a Local Area Network
(LAN). Remote control is accomplished using simple text based commands through the Telnet
protocol.
Please contact your local LabSat distributor or LabSat directly for the LabSat remote control information
pack for further details.
LabSat device registration
Racelogic recommend that all LabSat devices are registered immediately on receipt. Please go to
www.labsat.co.uk/register and fill in all the the details requested
. If you register your LabSat within its first
year warranty, you will automatically receive an additional year's warranty.
Registering your LabSat will enable you to easily communicate with our support team. Any firmware /
software updates will be available on the LabSat website. Updates are more robust and easier to use, and
later firmware releases offer bug fixes as well as added features and improvements to the original
specification of the product. Your details will be available to our Support Team, in case you need any
assistance in the future.