background image

Liability ........................................................................................  ii
Table of Contents  ........................................................................  v
Introduction ................................................................................  1

Important Notes for Maintenance Personnel ......................................................................................................................... 1
Mission Statement  ........................................................................................................................................................................... 1
Vision Statement ............................................................................................................................................................................... 1
NHTSA Warning ................................................................................................................................................................................. 2
To Contact Labrie Plus  .................................................................................................................................................................... 3

In the U.S. ...................................................................................................................................................................................... 3
In Canada ...................................................................................................................................................................................... 3

Safety ...........................................................................................  5

Safety Precautions for the Owner ............................................................................................................................................... 5
Safety Precautions for the Employee  ........................................................................................................................................ 6
W

ITTKE 

R

ETRO 

F

LTM

 Road Rules  ...................................................................................................................................................... 6

Overheight Caution  ......................................................................................................................................................................... 7
Safety Controls  .................................................................................................................................................................................. 7
Safety Decal Categories .................................................................................................................................................................. 8
Safety Decals and Locations  ......................................................................................................................................................... 8

Do not Enter! Stay Clear of Door  .......................................................................................................................................... 8
Do not Enter Hopper! Extreme Crush Hazard  ................................................................................................................. 9
Read and Understand Your Operating Manual Before Using This Vehicle ........................................................... 9
Keep Hands and Body Clear  ...............................................................................................................................................  10
Stand Clear of Tailgate! Extreme Crush Hazard  ...........................................................................................................  11
Service Hoist Handle ..............................................................................................................................................................  11
Do Not Climb on Canopy .....................................................................................................................................................  12
Check All Bridge Clearances  ...............................................................................................................................................  12
Do Not Drive When Overheight Warning Lamp is Illuminated  .............................................................................  13
Tailgate Locks Must Be In Place .........................................................................................................................................  13
Crush Hazard. Body May Fall  ..............................................................................................................................................  14
The Top of This Vehicle is High Enough  .........................................................................................................................  14
Danger of Electrocution/Damage to Vehicle  ...............................................................................................................  15
Frame is Heat Treated  ...........................................................................................................................................................  15
Disconnect All Batteries and Electronic Control Modules  .......................................................................................  16
Remove Cap Slowly  ...............................................................................................................................................................  16
Extension Ladder Must Be Secured ..................................................................................................................................  17
Lubrication Points  ..................................................................................................................................................................  17
Service Hoist Instructions  ....................................................................................................................................................  18
Air Tank Drain Notice  ............................................................................................................................................................  18
Setting the Tailgate Props (Curb Side) ............................................................................................................................  19
Setting the Tailgate Props (Street Side) ..........................................................................................................................  20
Diesel Fuel Notice ...................................................................................................................................................................  21
Programmed PTO Settings  .................................................................................................................................................  21
Hydraulic Fluid Notice ...........................................................................................................................................................  21
Hydraulic Oil Grade Notice ..................................................................................................................................................  22
Hydraulic Oil Fill Level ...........................................................................................................................................................  22

Safety Features  ...............................................................................................................................................................................  23

Automatic Grease System (optional) ...............................................................................................................................  23
External Access Pack Cylinder Grease Fittings .............................................................................................................  23

Table of Contents

Содержание Pendpac WITTKE RETRO FL



































































































































Отзывы: