Labrie Pendpac WITTKE RETRO FL, Руководство по обслуживанию, Страница: 52 / 130

42
Safety
Figure 2-8 Proper lift setup
Lifting the Body
Lifting the Front Loader body requires securing both the front body and the rear body to a lift beam.
You will need two lift spools and two lift beams.
I
MPORTANT
: Never lift the rear body until you have secured the front body to another lifting device.
To lift the body:
1.
Secure the rear body to a lift beam. Refer to “Securing the Rear Body” on page 39.
2.
Raise the arms and forks until they are resting on the rubber arms stops on the sides of the body.
3.
Insert a lift spool into each end of the arm pivot tube.
4.
Wrap a lift chain around each lift spool and fasten the grab hooks securely on each chain
(see Figure 2-7).