Labrie Automizer Versa Hand, Общее обслуживание, Страница: 103 / 105

1-103
GENERAL MAINTENANCE
AUTOMIZER
TM
PREVENTIVE MAINTENANCE CHART
COMPONENT /
SYSTEM
VERIFICATION
EACH
YEAR
WEEKLY
Hydraulic system
MONTHLY
DAILY
SECTION
– Check pressure.
– Check oil level in tank and
refill if necessary.
– Check if the ball valve is
open on main tank.
– Check on ground for
overnight leaks.
– Check cylinders, pump,
control valve and system
for leaks. Repair or replace
if required.
– Replace hydraulic filter.*
– Drain, flush, clean and refill
strainer.
1.9
1.15
1.14.8
1.14.7
Hopper area
– Clean traps on each side.
– Tilt down the floating panel
and clean dirt under or
behind the packer.
1.11
1.11
Visual inspection of
the following
components:
– Rollers, hydraulic
cylinders and cylinder
pins, hoses, pipes and
connections, wear of floor
and side of hopper.
1.11
Body and chassis – Check for corrosion.
– Keep the contact surfaces
clean, between the body
and chassis.
* Also replace the return filter after the first 50 hours of operation
1.10
9
9
9
TWICE
A YEAR
9
9
9
9
9
9
9
1.14.5
1.14
9
1.21 AUTOMIZER PREVENTIVE
MAINTENANCE CHART