When the space is about 2-5mm, close Paper Holder Cover, Space
send papers out by manually turning [Paper Feed Knob] while
drawing paper by hand to prevent undesired sticking of paper.
During this salvage procedure, make sure that next print is
laminated correctly. If correct laminating goes on, depress
[START/STOP] switch to resume operation. If the space
between prints exceeds 5mm or more, the laminating tape
will have to be reset. Space Sensor
5-4 ATTENTION AT THE END OF JOB
When a job ends, leaving the machine unused for a while,
make [Paper Holder] slightly raised to prevent possible
deformation of [Paper Feed Press Roller].
How to raise [Paper Holder]:
1. Unlock [Paper Holder] by turning [Paper Holder
Lock Lever]clockwise.. Paper Holder
2. Lift [Paper Holder] slightly by hand and replace Paper Holder
[Paper Holder Lock Lever]. (The spring automatically Lock Lever
replaces the lever.)
3. Gently lower [Paper Holder]. Hook will keep [Paper Holder] slightly raised.
16
